|
The
T62LC Chassis Dynamometer has been designed and developed to enable the
user to carry out a more complete range of tests. Full 'Closed Loop' control
enables a vast range of tests to be made with the minimum of effort. Wind Drag,
Sweep and step testing, constant loading are just some of the features of the
Dyna Pro T62LC. Obviously with the LC range inertial acceleration tests
can still be performed as the standard T62
The T62LC can also be upgraded to accept motorcycles as shown above, a motorcycle attachment is
available to release the potential of your dyno to a wider spectrum of clients.
We've worked day and night on this system to allow the user to spend more time
testing vehicles than altering software variables to achieve decent step and
hold features.
Our system will hold at specified RPM's or MPH without
overshooting then undershooting, then overshooting, then undershooting etc........No
other user input is required, no hassle, just test !
These
results speak for themselves
|
Settings for the test |
Results from the test |
Add
to this various upgrades available, A/F Gas analysis, thermocouples, etc and the
data unfolds right before your eyes.
The T62LC Inertia Chassis Dynamometer is a breakthrough in terms of
performance for money.
Design, Manufacture, Software and Electronics are all manufactured ‘in
house’ by our highly skilled workforce, thus keeping costs to the end user to
a minimum.
Dyna Pro Standard Package:-
 |
T62LC Chassis Dynamometer |
|
Dyna Pro Advanced user friendly Windows software |
|
Dyno - PC USB Link |
|
Air Brake |
|
Battery Charger |
|
Electric starter |
|
Multi-Function Hand Controller |
|
Intelligent Inductive Ignition Pick-up (Primary / HT) |
|
1 Day Training |
|
1 Year Parts Warranty |
|
Specifications |
| Dimensions |
| |
|
| Length |
2000 |
| Width |
3100mm |
| Height |
450mm |
| Drum Diameter |
453mm |
| Drum Width |
450mm |
| Drum Concentricity |
+/- 0.025mm |
| Maximum Bike length |
2340mm |
| |
|
| Weight |
| |
|
| Complete Dynamometer |
1050Kg |
| Drum Weight |
500Kg |
| |
|
| Materials |
|
| |
|
| Drum |
Steel |
| Drum Shaft |
55mm Ground steel |
| Frame |
Precision Lazer Cut 5mm Steel |
| |
|
| Technical Specification |
| |
|
| Absorption Unit |
858 ft/lbs |
| Roller Inertia |
12.8 Kg/m2 net |
| Maximum Horsepower |
600Hp |
| Maximum Speed |
200mph |
| Maximum Torque |
500ft/lbs |
| Timing Accuracy |
+/- 50 nano Seconds |
| Drum Speed Accuracy |
+/- 0.01mph |
| RPM Accuracy |
+/- 0.1rpm |
| Distance Accuracy |
14mm Over 10 Miles |
| Calibration |
Pre - Calibrated |
| RPM Pick-up |
Intelligent Inductive Primary / HT Pick-up |
| Power |
240v 32A Single Phase |
| Data Acquisition |
12 User Data Ports |
| 
